Timber gates ~ The Shakespeare, manufactured to your own sizes by Inwood (Cymru) Ltd. North Wales timber gates & garage door manufactuers

	Inwood (Cymru) Ltd.				Unit A1, Cefndy Industrial Park. Cefndy Road, Rhyl, Denbighshire, LL18 2HJ

Handcrafted timber gates & garage doors to your own sizes!

Telephone ~ 01745 362444 Fax ~ 01745 810126
enquiries@traditionaltimbergates.co.uk

Home | Contact us | How to find us | Terms & conditions | View our timber garage doors

Back to timber gate styles \| Site map

The Shakespeare ~

The Shakespeare gates feature a sloping head, rising 6'' (152mm) upwards from the lowest point.
The Shakespeare can be configured as above, with the lowest point being at the stiles of the gate or alternatively the gates can slope downwards from the stiles (see picture below).

Available in Idigbo, Meranti (above) or Scandinavian Redwood (left).

The pictures above show the close boarded Shakespeare; an open boarded version is also available.

Specification

Head & stiles ~ Ex 3'' (75mm) x 3'',

All other rails ~ Ex 3'' x 2 1/2'' (64mm),

Diagonal braces ~ Ex 3'' x 1 1/2'' (39mm)

Tongue & groove boarding (close boarded version only) ~ Ex 4'' (100mm) x 3/4'' (18mm)

Infill boarding (open boarded version only) ~ Ex 3'' x 1'' (At gaps of no greater than 2'' or 50mm)

If you like this gate then please contact us with the sizes you require.

Back to timber gate styles

Home | How to find us | Terms & conditions | Site map

All content © copyright 2003-2008. All rights reserved.